Bright Dyes

Technical Data

Products
MSDS
TDS
FAQ
Contact
Samples
Links
Home

 

TECHNICAL DATA FLT YELLOW/GREEN

Bright Dyes Yellow/Green products are specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection material and has been used for labeling studies from the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears yellow/green, depending on its concentration and under UV light as lime green.

Based on biochemical oxygen demand (BOD) studies, the dye is biodegradable with 65% of the available oxygen consumed in 7 days. The dye is resistant to absorption on most suspended matter in fresh and salt water. However, compared to Bright Dyes FWT Red products it is significantly less resistant to degradation by sunlight and when used in fluoremetry, stands out much less clearly against background fluorescence. As always the suitability of these products for any specific application should be evaluated by a qualified hydrologist or other industry professional.

General Properties

Tablets

Liquids

Powders

Detectability of active ingredient 1

Visual <100 ppb

Visual <100 ppb

Visual <100 ppb

Absorption/Emission

490/520 nm

490/520 nm

490/520 nm

Appearance

Orange convex 1.6cm diameter

Reddish-brown aqueous solution

Orange fine powder

NSF, max use levels in potable water

6.0 ppb

10.0 ppb

1.0 ppb

Weight

1.35 gms + 0.05

n/a

n/a

Dissolution Time 3

95% < 6 minutes

Immediately

50% < 3 minutes 95% < 6 minutes

Specific Gravity

n/a

1.05 + 0.05 @ 25° C

n/a

Viscosity 4

n/a

1.8 cps

n/a

pH

n/a

8.5 + 0.5 @ 25° C

n/a

Coverage of Products

One Tablet

One Pint Liquid

One Pound Powder

Light Visual (100 ppb)

605 gallons

125,000 gallons

1,200,000 gallons

Strong Visual (1 ppm)

60 gallons

12,500 gallons

120,000 gallons

Caution: These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical.

To our best knowledge the information and recommendations contained herein are accurate and reliable. However, this information and our recommendations are furnished without warranty, representation, inducement, or license of any kind, including, but not limited to the implied warranties and fitness for a particular use or purpose. Customers are encouraged to conduct their own tests and to read the material safety data sheet carefully before using.

Products | MSDS | Technical Data Sheets | FAQs | Contact Us | Samples | Quote | Home