Home
Products
MSDS
Technical Data Sheets
FAQ's
Contact Us
Samples
Request a Quote
Links
TECHNICAL DATA FLT YELLOW/GREEN WAX

Bright Dyes Yellow/Green Dye products are specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection dye and has been used for labeling studies since the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears yellow/green, depending on its concentration and under UV light as lime green.

Based on biochemical oxygen demand (BOD) studies, the dye is biodegradable with 65% of the available oxygen consumed in 7 days. The dye is resistant to absorption on most suspended matter in fresh and salt water. However, compared to Bright Dyes FWT Red products it is significantly less resistant to degradation by sunlight and when used in fluoremetry, stands out much less clearly against background fluorescence. As always the suitability of these products for any specific application should be evaluated by a qualified hydrologist or other industry professional.

General Use:

* Examine Water Movement, Current, Flow (In springs, streams, lakes etc.)
* Flow Mapping, Tracing and Time Studies
* Pollution Studies (Discharge &endash; Rate of Flow &endash; Mixing, Diffusion and Dispersion &endash; Circulation)

General Properties

Dye Cakes

Dye Cones

Dye Donuts

Detectability of active ingredient 1

Visual <100 ppb

Visual <100 ppb

Visual <100 ppb

Maximum absorbance wavelength 2

490/520 nm

490/520 nm

490/520 nm

Appearance & Size

Orange Cone
1 7/8" Base
7/8" Height

Orange Cone
3.0" Base
1 3/8" Height

Orange Donut
4" Diameter
4" Height / _" hole

Weight

1.25 oz + 5%

4.5 oz + 5%

32 oz + 5%

Wrapping

Heat sealed in cold water soluble film

Heat sealed in cold water soluble film

Heat sealed in cold water soluble film

Dissolution Time

About 45 minutes in sea water

About 1 _ hours in sea water

About 3-5 hours in sea water

Coverage of Products

Cakes

Cones

Donuts

Light Visual (100 ppb)

2,400 gallons

9,600 gallons

74,000 gallons

Strong Visual (1 ppm)

240 gallons

960 gallons

7,400 gallons

Caution: These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical.

To our best knowledge the information and recommendations contained herein are accurate and reliable. However, this information and our recommendations are furnished without warranty, representation, inducement, or license of any kind, including, but not limited to the implied warranties and fitness for a particular use or purpose. Customers are encouraged to conduct their own tests and to read the material safety data sheet carefully before using.