Bright Dyes

Technical Data

Products
MSDS
TDS
FAQ
Contact
Samples
Links
Home

 

TECHNICAL DATA FLT ORANGE

Bright Dyes FLT Orange products are specially formulated versions of Xanthene dye for convenient use in water tracing and leak detection studies. This fluorescent orange dye is certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. It may be detected visually, by ultraviolet light and by appropriate fluoremetric equipment. Today it is most often used visually. Visually the dye appears orange to red-orange, depending on its concentration and under ultraviolet light as bright yellow.
The dye is resistant to absorption on most suspended matter in fresh and salt water. However, compared to Bright Dyes FLT Yellow/Green products it is slightly more resistant to degradation by sunlight but less resistant than our FWT Red products. As always the suitability of these products for any specific application should be evaluated by a qualified hydrologist or other industry professional.

General Properties

Tablets

Liquids

Powders

Detectability of active ingredient 1

Visual <100 ppb

Visual <100 ppb

Visual <100 ppb

Maximum absorbance wavelength 2

515/535 nm

515/535 nm

515/535 nm

Appearance

Brick red convex 1.6cm diameter

Reddish-Orange aqueous solution

Brick red fine powder

NSF, max use levels in potable water

0.3 ppb

0.8 ppb

0.1 ppb

Weight

1.35 gms + 0.05

n/a

n/a

Dissolution Time 3

50% < 3 minutes
95% < 6 minutes

n/a

50% < 3 minutes
95% < 6 minutes

Specific Gravity

n/a

1.05 ± 0.05 @ 25∞ C

n/a

Viscosity 4

n/a

1.8 cps

n/a

pH

7.5 ± 0.5

8.0 ± 0.5 @ 25∞ C

7.5 ± 0.5

Coverage of Products

One Tablet

One Pint Liquid

One Pound Powder

Light Visual (100 ppb)

350 gallons

40,000 gallons

604,000 gallons

Strong Visual (1 ppm)

35 gallons

4,000 gallons

60,400 gallons

Caution: These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical.

To our best knowledge the information and recommendations contained herein are accurate and reliable. However, this information and our recommendations are furnished without warranty, representation, inducement, or license of any kind, including, but not limited to the implied warranties and fitness for a particular use or purpose. Customers are encouraged to conduct their own tests and to read the material safety data sheet carefully before using.

Products | MSDS | Technical Data Sheets | FAQs | Contact Us | Samples | Quote | Home