Bright Dyes

Technical Data

Products
MSDS
TDS
FAQ
Contact
Samples
Links
Home

 

TECHNICAL DATA
FLT ORANGE WAX

Bright Dyes Orange products are specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection material and has been used for labeling studies from the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears orange to red-orange, depending on its concentration and under UV light as bright yellow.

The dye is resistant to absorption on most suspended matter in fresh and salt water. However, compared to Bright Dyes FLT Yellow/Green products it is slightly more resistant to degradation by sunlight but less resistant than our FWT Red products. As always a qualified hydrologist or other industry professional should evaluate the use and suitability of these products for any specific application.

General Use:
• Examine Water Movement, Current, Flow (In springs, streams, lakes etc.)
• Flow Mapping, Tracing and Time Studies
• Pollution Studies (Discharge – Rate of Flow – Mixing, Diffusion and Dispersion – Circulation)

General Properties

Cakes

Cones

Donuts

Detectability of active ingredient 1

Visual <100 ppb

Visual <100 ppb

Visual <100 ppb

Maximum absorbance wavelength 2

515/535 nm

515/535 nm

515/535 nm

Appearance
Size

Brick Red Cone
1 7/8” Base
7/8” Height

Brick Red Cone
3.0” Base
1 3/8” Height

Brick Red Donut
4” Diameter
4” Height / _” hole

Weight

1.25 gms + 0.05

4.5 oz ± 5%

32 oz ± 5%

Wrapping Heat sealed in cold water soluble film Heat sealed in cold water soluble film Heat sealed in cold water soluble film

Dissolution Time 3

About 45 minutes in sea water

About 1.5 hours in sea water

About 3-5 hours in sea water

Coverage of Products

One Cake

One Cone

One Donut

Light Visual (100 ppb)

1,800 gallons

6,000 gallons

46,500 gallons

Strong Visual (1 ppm)

180 gallons

600 gallons

4,650 gallons

Caution: These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical.

To our best knowledge the information and recommendations contained herein are accurate and reliable. However, this information and our recommendations are furnished without warranty, representation, inducement, or license of any kind, including, but not limited to the implied warranties and fitness for a particular use or purpose. Customers are encouraged to conduct their own tests and to read the material safety data sheet carefully before using.

Products | MSDS | Technical Data Sheets | FAQs | Contact Us | Samples | Quote | Home